• Top Contact
  • +91-9920964999sales@sonicsteels.com
  • info@sonicsteels.com
  • Top Home
  • No. 112, Nanavaty Building, 3rd Floor, Ardeshir Dady Street, C.P. Tank,
    Mumbai - 400004, Maharashtra, India
Stainless Steel Strip

Stainless Steel Strip

Sonic Steels offers one of the most comprehensive range of Stainless Steel Strips in India and also exportit in other countries. These strips are highly in demand for their diversibility & finishing.

Stainless steel is used in food industries, chemical, electrical, generator, shaft, cement & gas industries as well.It is non corrosive, highly tensile in strength and its finish is seamless.

Application

  • Automobile Industry
  • Construction, Pharmaceutical
  • Chemical Industry.
  • Oil & Gas Industry

Specifications:

Grades stainless steel J1, J2, J4, 201, 202, 301, 304, 304H, 304L , 309, 309S, 310, 310S, 316, 316L, 316TI, 321, 321H, 347, 409, 410, 410S, 410S, 420, 430, 441, 904L
Thickness : 0.02mm To 5.00 mm
Width : 3.2mm To 1500mm
Length : AS PER CUSTOMER'S REQUIREMENT
Type of Material : STAINLESS STEEL SOFT, DEEP DRAW, EXTRA DEEP DRAW, QUARTER HARD, HALF HARD,FULL HARD.
Form : Coil / Strip
Test Certificate : Yes
Finish : NO.1, 2B, 2D, 2H, 2R, No.4, HAIRLINE, SCOTCH BRITE , SATIN FINISH, NO.8, BA.
Make : JINDAL, BAHRU, POSCO KOREA, POSCO THAINOX, COLUMBUS, ACERINOX, APERAM, TISCO, NISSHIN, NIPPON AND MANY MORE MILLS.

Chemical Composition :

C Mn Si P S Cr Ni N
304 0.07max 2.0max 0.75max 0.045max 0.03max min: 18.0 max: 20.0 min: 8.0 max: 10.5
304L 0.03max 2.0max 0.75max 0.045max 0.03max min: 18.0 max: 20.0 min: 8.0 max: 12.0 0.10 max
304H min: 18.0
max:20.0
min: 8.0
max: 10.5
min: 0.04
max:0.10
0.75
max
2.0
max
0.045
max
0.03
max
0.10
max
SS 309SS 310SS 310S
Ni 14 max 19 – 22 19 – 22
Cr 23 max 24 – 26 24 – 26
C 0.20 max 0.25 max 0.08 max
Fe 60 max Balance
Mn 2 max 2 max 2 max
Si 1 max 1.50 max 1.50 max
S 0.030 max 0.03 max 0.03 max
P 0.045 max 0.045 max 0.045 max
STANDARD UNS WNR. AFNOR EN JIS BS GOST
SS 316 S31600 1.4401 / 1.4436 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3 SUS 316 316S31 / 316S33 -
SS 316L S31603 1.4404 / 1.4435 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2
C Mn Si P S Cr Mo Ni N
316
0.08
max
2.0
max
0.75
max
0.045
max
0.03
max
min: 16.0
max: 18.0
min: 2.0
max: 3.0
min: 10.0
max: 14.0
0.10
max
316L
0.03
max
2.0
max
0.75
max
0.045
max
0.03
max
min: 16.0
max: 18.0
min: 2.0
max: 3.0
min: 10.0
max: 14.0
0.10
max
316H - - - - - 16.0 2.00 10.0 -
0.08 2 0.75 0.045 0.03 18.0 3.00 14.0 0.1
Grade C Mn Si P S Cr Mo Ni N
317 0.08 max 2 max 1 max 0.040 max 0.03 max 18 – 20 3 – 4 11 – 14 -
317L 0.035 max 2 max 1 max 0.040 max 0.03 max 18 – 20 3 – 4 11 – 15 -
% Cr Ni C Si Mn P S N Ti Fe
321 min:17.0
max:19.0
min: 9.0
max:12.0
max:0.08 max:0.75 max:2.0 max:0.045 max:0.03 max:0.10 min:5*(C+N)
max:0.70
Balance
321H min:17.0
max:19.0
min: 9.0
max:12.0
min:0.04
max:0.10
min:18.0
max:20.0
max:2.0 max:0.045 max:0.03 max:0.10 min:5*(C+N)
max:0.70
Balance
C Cr Mn Ni P S Si Cb/Ta
347 0.08 max min: 17.0
max: 20.0
2.0 max min: 9.0
max: 13.0
0.04 max 0.30
max
0.75
max
min:10x C
max: 1.0
347H min: 0.04
max: 0.10
min: 17.0
max: 20.0
2.0 max min: 9.0
max: 13.0
0.03 max 0.30
max
0.75
max
min:10x C
max: 1.0
C Cr Cu Mn Mo Ni P S
Max     Max     Max Max
0.02 19.0-23.0 2.0 4.0-5.0 23.0-28.0 0.045 0.035 1.0

Mechanical Properties :

Grade Tensile Strength ksi (min) Yield Strength 0.2% ksi (min) Elongation % Hardness (Brinell) MAX Hardness (Rockwell B) MAX
304 75 30 40 201 92
304L 70 25 40 201 92
304H 75 30 40 201 92
SS 309 SS 310 SS 310S
Tensile Strength Psi – 89900 , MPa – 620 Psi – 75000 , MPa – 515 Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 45000 , MPa – 310 Psi – 30000 , MPa – 205 Psi – 30000 , MPa – 205
Elongation 45 % 35 % 35 %
SS 309 SS 310 SS 310S
Tensile Strength Psi – 89900 , MPa – 620 Psi – 75000 , MPa – 515 Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 45000 , MPa – 310 Psi – 30000 , MPa – 205 Psi – 30000 , MPa – 205
Elongation 45 % 35 % 35 %
Grade Tensile Strength
ksi (min)
Yield Strength
0.2% ksi (min)
Elongation % Hardness (Brinell) MAX Hardness
(Rockwell B) MAX
316
75 30 40 217 95
316L
70 25 40 217 95
316TI 515(Mpa) 205(Mpa) 35 205 75
Grade C Mn Si P S Cr Mo Ni N
317 0.08 max 2 max 1 max 0.040 max 0.03 max 18 – 20 3 – 4 11 – 14 -
317L 0.035 max 2 max 1 max 0.040 max 0.03 max 18 – 20 3 – 4 11 – 15 -
Grade Tensile Strength
ksi (min.)
Yield Strength 0.2%
Offset ksi (min.)
Elongation -
% in
50 mm (min.)
Hardness
(Brinell) MAX
321/321H 75 30 40 217
Grade Tensile Strength ksi (MPa) min Yield Strength 0.2% ksi offset ksi (MPa) min Elongation (% in 50mm) min Hardness (Brinell) MAX Hardness (Rockwell B) MAX
347/347H 75
(515)
30
(205)
40 201 95
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) Brinell (HB)
904L 490 220 36 70-90 typical 150

Why Choose Us:

  • You can get the perfect material according to your requirement at the least possible price.
  • We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
  • We have 30+years of experience in this field as we serve the highest level of quality.
  • The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
  • e guarantee to give a response within 24hours(usually in the same hour)
  • You can get stock alternatives, mill deliveries with minimizing manufacturing time.
  • We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.

Documents presented by us:

  • Commercial Invoice consisting HS code
  • Material examination records as per EN 10204 3.1, EN 10204 3.2
  • Certificate of foundation legalized/attested by chamber of commerce or delegation
  • We provide guarantee latter.
  • Packing details such as number of boxes, net weight and gross weight, marks and numbers
  • Laboratory examined reports sanctioned by NABL
  • Certificates regarding fumigation
  • Raw material analysis reports
  • Test certificates approving NACE MR0175
  • Heat treatment sketches
  • Material verifiability records
  • We present quality assurance plan(QAP)
  • Welding procedure qualification, procedure qualification report, WPQ/PQR

Tests we carry out (including both Destructive and Non-Destructive)

  • Positive material recognition
  • Mechanical examining like tensile, Elongation and reduction of area.
  • Large-scale test
  • Chemical examination-Spectro analysis
  • Firmness test
  • Pitting protection test
  • Hydrogen-effected cracking test approved by NACE TM0284
  • Small tests
  • X-ray test
  • Impact analysis
  • Eddy current examining
  • Hydrostatic analysis
  • Prompt test
  • Sulfide stress corrosion test approved by NACE TM 0177
  • Curve test